Capris have been a fashion statement for quite some time now. If you’re feeling a little crafty and want to DIY your old jeans into capris, keep reading. First, you need a pair of jeans.
Before you begin cutting, you need to mark your desired length using chalk. Extend the mark across the width of the trouser legs using a ruler and then crop off the jeans. Simple, right? In this article, I will walk you through the steps on how to cut jeans into capris with just a few household tools.
Capris pants come in different lengths. Most usually end anywhere below the knee but above the ankles. They make for a good summer outfit and are popular among all age groups.
While it’s easier to buy capris from stores, making your own pair will give you a sense of accomplishment compared to store-bought ones. Fortunately, you don’t need a lot of tools to turn your jeans into capris. All you need are a pair of scissors, chalk, a sewing machine, and some thread. Easy right?
Once you have the tools, follow these steps to turn your pair of jeans into lovely-looking capris.
Put on your jeans and mark the length you want with chalk. Measure the widest portion of your calf and add two inches to make it easier to move around. This is the measurement of your pants’ width at the hem. Make a mark on both legs with tailor’s chalk.
Tailor’s chalk is essential since you’ll be able to see where you may need to cut or sew clearly.
Once you set your mark at the desired length, extend it across both legs with a ruler. Doing this on a flat surface will give you the best results. Measure the length of both legs from the trouser’s inseam and the waistline to ensure they’re symmetrical. This will help you locate where you should mark on the opposite leg.
If you’ve ever sewed before, you understand that a good pair of scissors is essential for precise fabric shaping. Fabric scissors come in various styles, including electric models, arthritis-friendly scissors, and dressmaking shears. The best fabric scissors should be sharp enough to cut the pair of jeans while still being comfortable to hold. Once you have the cut marks in place, follow these steps to crop off your trouser legs.
Use a sharp pair of scissors to cut a few inches below one of the lines you’ve marked with your chalk. You need to leave an allowance for the hem, which will also allow for room for error.
Cut through one leg at a time to get a straight line. Using a dull pair of scissors will result in a sloppy hem. You want your capris to look professionally made, so don’t take any chances and use a good pair of scissors.
After cutting the first leg, use the bottom strip as a template to ensure the next leg is the same length as the first. Place the strip directly onto the uncut leg, and then cut through with your scissors.
Try on your jeans and alter the length if necessary. Unless you’re very precise, you might not get the correct measurements on your first cut. But don’t worry; you can always make new marks and adjust until you achieve the desired length.
Once you’re comfortable with the length of the jeans, it’s time to hem the cut edges. Your sewing machine will come in handy at this stage. If you want a clean look, fold up the hem twice.
However, some jeans fabrics can be too heavy to fit under the needle of some sewing machines. If that’s the case, you can do a single fold before sewing. Once your folds are ready, run your hem through the sewing machine and use a straight or a zigzag stitch. Make sure to use a matching thread color for a clean look.
TIP: You can use a contrasting thread color to make the hem pop and give your capris a more custom look. A bright color like yellow works well.
Make sure the machine allows you to modify the stitch length, zigzag width, and tension, so you have greater control over your sewing. Jeans are tough fabrics; thus, investing in a good sewing machine is essential.
Frequently Asked Questions
How Do I Cut My Jeans To Be Frayed Capris?
Frayed capris look excellent with t-shirts for a more casual look. After cutting your jeans, pull out the white threads. This will give your jeans a frayed look at the bottom. Add diagonal slashes along the bottom of your pants for extra flair, then unwind the threads using tweezers.
Further, irritate these regions and distress your jeans completely using sandpaper. You can learn more about how to distress jeans here(insert link to how to distress jeans using sandpaper)
Are Jean Capris Out Of Style In 2022?
While capris were most common in the 2000s, they definitely haven’t gone out of style yet. They are versatile and can pair well with most outfits like jeans trousers. Capris are perfect for when you want to show off a fantastic pair of shoes.
Where Did The Name Capris Come From?
The pants’ name comes from capris, an Italian island where they were fashionable in the late 1950s. Audrey Hepburn was one of the first movie actresses to wear capris, and the pants became associated with her iconic style.
There you have it-how to cut jeans into capris. Remember, in order to get clean cuts, you need to use a sharp pair of scissors. However, if you intend to distress the hem, a dull pair will work just fine. Fold the hem twice before sewing using a straight stitch for a clean look.